Multi Purpose Water Tanks & Pumps

Water Pumps

Rainwater Harvesting Controllers & Systems

Rainsaver Control Unit

Rainwater is free. Only one per cent of all the water in the entire world is fresh water, so you can’t afford to waste a single drop. Make the most of all the fresh, clean, rainwater falling on your roof, and flowing down your gutters. With a rainwater tank and a Rainsaver rainwater harvesting control system, you can use you valuable free rainwater every day.

Rainsaver is easily installed as a compact, wall mounted box. It integrates the water in your rainwater tank seamlessly with your mains water supply. You don’t have to do a thing, because Rainsaver is intelligent. Not only does Rainsaver help you to save money on water bills, it helps you to conserve water.

Features: - Heat and fade resistant, high quality plastic housing - IP56 weather proof for electrical safety (IP53 for Auto version) - Pump runlight indicates when rainwater is being pumped - Inbuilt remote capacitor – Easily accessible for service (Diver version) - Manual resettable overload – Protects the motor if the pump was to jam or overheat (Diver version) - Illuminated power-on switch – One-touch pump power isolation for safe and easy routine service (Diver version) - Six models available to suit various applications - High flow capabilities – can provide flows up to 100 litres per minute - Power rate for pumps up to 1.1kW – can use larger pump to meet all domestic needs - 800kpa max. working pressure – designed to handle rising mains pressure - Quality, all brass fittings – Torque tested and tension resistant - Plug-in power supply

Rainsaver Universal Auto

Alternate water Supply system incorporating automatic mains backup for the control of surface mounted Automatic Pressure System Pumps. Controls pumps to maximum of 1.5ho, 1.1kW in cold water (<40oC). Max. recommended continuous pump flow: 100 litres per minute. Max. recommended pump pressure: 800kPa. Max. recommended mains inlet pressure: 800kPa.

Supplies clean rainwater from a rainwater tank via an automatic pressure system pump to toilets, laundry and garden taps in a household. Mains water is also connected to the Rainsaver Universal Auto as an automatic backup should rain water level be too low, or if there is a power or pump failure. (Should there be a pump failure, mains backup is achieved by turning the rainsaver universal auto off at the power point).

The float switch supplied prevents the pump from running dry and allows automatic switch-over to mains supply should the rain water level in the tank be too low.